1997 (1/2) -1999 Manual BMW M3 Rebuild
WE REBUILD THE CORE YOU SEND US!
Get your 1997 (1/2) -99 Manual BMW M3 back on the road or track. Our rebuild will have your driveshaft running like new.
Full rebuild includes the following:
2 new u-joints
1 new center support bearing
1 new nose bushing
1 new compression washer
U-joints are re-staked like OEM.
How it works:
- Inspect your core to make sure that it can be rebuilt. This means no dents in the tubes, flanges and tube yokes are not worn into by the u-joints, the middle end yoke and stub still fit tightly together, 3 prong is not badly damaged, and the u-joints have not already been replaced (there are two sets of staking marks). If you are unsure, email us photos!
- Mail us your core driveshaft. Pay for return shipping as well.
- We rebuild YOUR CORE. You will get the exact same core back. If you send us a crappy core, do not expect to magically get a nicer one back. Send us a good core and you’ll end up with a driveshaft that is better than new.
- We ship your driveshaft back to you.
- You’re back on the road!